Ana içeriğe geç

Giriş Geçmişi: Google Pixel 8a Logic Board Replacement

Düzenleyen: Spencer Day

Düzenleme onaylandı tarafından Spencer Day

Önce
Sonra
Değiştirilmemiş
Cihaz
Google Pixel 8a
Type
replacement
Thing
Logic Board
Title
Google Pixel 8a Logic Board Replacement
Introduction
***This repair guide was authored by the iFixit staff and hasn’t been endorsed by Google. Learn more about our repair guides [[Info:content-quality|here|new_window=true]].***
Follow this guide to replace the logic board in your Google Pixel 7a.
The logic board includes the in-screen front sensors, USB-C charging port, SIM tray slot, and lower microphone.
''You'll need replacement front back cover and flash unit adhesives to complete this repair.''
***Note:*** Any repair can compromise the water resistance of your phone. Retaining water resistance after the repair will depend on how well you reapply the back cover adhesive.
Time Required Min
1 saat
Time Required Max
2 saat
Imageid
Önce
Sonra
Difficulty
Moderate
Conclusion
***To reassemble your device, follow these instructions in reverse order.***
To run a diagnostics test with the built-in Pixel Diagnostic tool, [document|35835|click here].
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting|new_window=true]], or ask our [link|https://www.ifixit.com/Answers/Device/Google%20Pixel%208a|Answers community|new_window=true] for help.
Author
Public
Hayır

Kılavuz Ön Koşulları

Aletler

  • SIM Card Eject Tool x1 added.
  • iFixit Opening Tool x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • Spudger x1 added.
  • Tweezers Angled x1 added.
  • Isopropyl Alcohol x1 added.
  • Microfiber Cleaning Cloths x1 added.
  • 3IP Torx Plus Bit x1 added.
  • T3 Torx Screwdriver x1 added.
  • Hair Dryer x1 added.
  • Heat Gun x1 added.
  • iOpener x1 added.
  • Suction Handle x1 added.

İşaretler

  • In Progress added.

Adımlar

Adım #: 1
Önce
Sonra