Google Pixel 4 XL Battery Replacement 2 No'lu Adım Geçmişi

	[* black] Pull on the black pull tab at a shallow angle with steady force. When the adhesive grows long, roll it around a spudger and continue pulling.
	[* black] Continue firmly pulling up on the adhesive strip with constant force, spinning the spudger every so often to keep the exposed section of the pull tab as short as possible.
	[* icon_note] This may take a lot of force.
	[* icon_note] These adhesive pull tabs are very prone to snapping in half during this process. Try pulling as slowly as possible.
-	[* icon_note] If the adhesive pull tabs are not stretching, you ~~may need to reapply an iOpener, *but do not apply heat directly to the battery*. You~~ can ~~also~~ fill a plastic dropper or syringe with high concentration isopropyl alcohol and apply a few drops under the left edge of the battery. Give the alcohol a minute to weaken the battery adhesive.
+	[* icon_note] If the adhesive pull tabs are not stretching, you can fill a plastic dropper or syringe with high concentration isopropyl alcohol and apply a few drops under the left edge of the battery. Give the alcohol a minute to weaken the battery adhesive.
	[* black] Continue this process for each of the three pull tabs, until all are either out or have snapped in half.