4. Adımdaki Değişiklikler
Düzenleyen: Carsten Frauenheim —
Düzenleme onaylandı tarafından Carsten Frauenheim
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Lift the battery up, away from the phone. |
|---|---|
| - | [* icon_note] You may need to peel the battery away from any leftover adhesive tabs. |
| - | [* black] Remove the battery. |
| + | [* black] Lift the battery up, away from the phone to remove it. |
| + | [* icon_caution] Do not reuse the battery after it has been removed, as doing so is a potential safety hazard. Replace it with a new battery. |
| [* icon_reminder] To install a replacement battery: | |
| - | [* black] Lay some double-sided tape in the phone's battery well, being careful not to cover the charge port flex cable. Peel away any tape liners to expose the adhesive. |
| + | [* black] Remove any remaining adhesive from the battery well. |
| + | [* black] Lay some [guide|137171|stretch release adhesive strips], [product|IF317-072-1|double-sided tape|new_window=true], or [guide|113604|pre-cut adhesive strips|new_window=true] in the phone's battery well, being careful not to cover the charge port flex cable. Peel away any tape liners to expose the adhesive. |
| [* black] ''Temporarily ''re-connect the battery's connector to the motherboard socket. This ensures that the battery is properly positioned. | |
| [* black] Lay the battery on the adhesive and press firmly. | |
| [* black] Disconnect the battery connector from its motherboard socket and resume re-assembly. |