Bu Adımdaki Değişiklikler
Düzenleyen: ScottMcNay —
Düzenlenme reddedildi tarafından Carsten Frauenheim
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [* icon_reminder] To install a replacement battery; |
|---|---|
| + | [* black] Remove any remaining adhesive from the battery well. If you do not have replacement adhesive, the well is probably sticky enough to hold the replacement battery, just be sure to remove any lumps of adhesive. |
| + | [* black] If you're using stretch release adhesive, apply them onto the battery. Otherwise, apply some double-sided tape, or pre-cut adhesive strips in the phone's battery well, being careful not to cover the charge port flex cable. Peel away any tape liners to expose the adhesive. |
| + | [* black] ''Temporarily'' re-connect the battery's connector to the motherboard socket. This ensures that the battery is properly positioned. |
| + | [* black] Lay the battery in place and press firmly. |
| + | [* black] Disconnect the battery connector again until you are ready to test the phone and seal it up. |
| + | [* icon_note] In some cases, the cable on the replacement battery will go under the battery, not in front as shown. |