3. Adımdaki Değişiklikler
Düzenleyen: Carsten Frauenheim —
Düzenleme onaylandı tarafından Carsten Frauenheim
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Remove the main board supports | |
| [* black] Flip your power station over. | |
| - | [* red] Use a Phillips screwdriver to remove the four 6 mm‑long screws securing the main board supports. |
| - | [* icon_caution] Hold the |
| + | [* red] Use a Phillips screwdriver to remove the four 6 mm‑long screws securing the two main board supports. |
| + | [* icon_caution] Hold the supports in place while removing the final screws. Otherwise, the support may swing onto the board and damage the small, surface‑mounted components. |
| [* black] Remove the main board supports. | |
| - | [* icon_reminder] During reassembly, make sure the beveled sides of the main board support screw holes |
| + | [* icon_reminder] During reassembly, make sure the beveled sides of the main board support screw holes face up. |