5. Adımdaki Değişiklikler
Düzenleyen: Sem Vandekerckhove —
Düzenleme onaylandı tarafından Jake Devincenzi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* red] Now, its time to release the vibrator connector, and then release the lower connector on the main board ( see pic 2). Remove the black tape first, and then use some tweezers to pull out the connector. | |
| - | [* icon_caution] Once its done, lift by one side the main board, and you can see the LCD connector. Open the white tab and remove the flat cable. |
| + | [* icon_caution] Once its done, lift by one side the main board, and you can see the LCD connector. Open the white tab by lifting it up at the edge, and remove the flat cable. |