Lenovo Y410P LCD Replacement 3 No'lu Adım Geçmişi

3. Adımdaki Değişiklikler

Düzenleyen: Dan — 9 Mar 2019

Düzenleme onaylandı tarafından Jonah Aragon

	[title] Remove Bezel (plastic frame)
-	[* black] Unclip ~~two~~ latches~~, one in~~ each bottom corner. They are located below the screws previously removed.
-	[* black] Place fingers to the ~~inside~~ of the bezel. Separate the bezel by pulling it away from the back cover. Pull until one side has been lifted.
+	[* black] Unclip the latches at each bottom corner. They are located below the screws that were previously removed.
+	[* black] Place your fingers inside of the edge of the bezel. Separate the bezel by pulling it away from the back cover. Pull until one side has been lifted.
	[* black] Use the same technique to separate all remaining sides of the bezel.
-	[* black] Starting at one corner and making your way around~~, make sure~~ the bezel is completely ~~unattached~~ from the back cover.
+	[* black] Starting at one corner and making your way around. Ensure the bezel is completely removed from the back cover.
	[* black] Completely remove bezel from LCD screen and back cover.