Bu Adımdaki Değişiklikler
Düzenleyen: John Taft —
Düzenlenme reddedildi tarafından Scott Havard
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [* black] Work warm water into the tubes going to the pump from each end of the tubes, until water can flow freely. WATER MUST FLOW FREELY through all the tubing. |
|---|---|
| + | [* black] Now you can reassemble the black pump cylinder. Be sure to carefully note which hoses go to the white plastic part with the four hose connectors. Otherwise, in my case, the pump was pumping the colored inks correctly, but pushing air back into the black ink cartridge, so no black ink would print. |
| + | [* black] Now you should be ready to assemble the pump/gear assembly back into the printer. |