Ana içeriğe geç
Adım 4 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Once the adhesive sticks to the battery, you can't peel it off or reposition it—if you make a mistake, you'll have to start over with fresh adhesive strips.

Double-check the orientation of the adhesive strips, and make sure your battery is still lying face-down (with the connector contacts facing up).

Carefully position the adhesive strips over the battery, and stick them in place as shown.

Place the strips slightly off-center, very close to the long edge of the battery.

The black pull tabs at each end should protrude equally far over the top and bottom edges of the battery.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.