Ana içeriğe geç
Yardım

Gateway NE56R27u Hard Drive Replacement

Adım 3 Düzenleniyor —

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 2 kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Unscrew the two 0.5mm screws from the hard drive brackets using the Phillips #0 screwdriver.

Pull the plastic tab attached to the hard drive to the right to remove the hard drive.

The hard drive plugs into the port on the left within the compartment. Be sure to gently remove the hard drive without damaging the port.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.