Ana içeriğe geç
Yardım

Google Pixel 4 Battery Replacement

Adım 3 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 6kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Do not reuse the battery if it has been deformed or damaged, as doing so is a potential safety hazard. Replace it with a new battery.

Lift the battery up and away from the phone to remove it. You may need to peel the battery away from any leftover adhesive tabs.

If there's any alcohol solution remaining in the phone, carefully wipe it off with a lint-free cloth or allow it to air dry before installing your battery.

To install a replacement battery:

If you're using stretch release adhesive, apply them onto the battery. Otherwise, apply some double-sided tape, or pre-cut adhesive strips in the phone's battery well, being careful not to cover the charge port flex cable. Peel away any tape liners to expose the adhesive.

Temporarily re-connect the battery's connector to the motherboard socket. This ensures that the battery is properly positioned.

Lay the battery in place and press firmly.

Disconnect the battery connector from its motherboard socket and resume re-assembly.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.