As mentioned in the previous step, the captive bottom right screw lifts up the cover. Use this as a starting point for your opening pick.

Move your pick clockwise in the seam between the cover and the laptop, gently lifting the plastic clips that are holding them together.

Once you reach the hinge, go back to the starting point and use the pick to release the clips holding the cover on the right side. Be careful to work around the ethernet port and the audio jack.

Once those clips have been release, gently lift the cover with your hands, releasing the clips along the hinge.

In the event that the right corner screw has been removed from the lid, despite the warning on Step 2, the iFixIt suction handle can be used to gently remove the lid.