Ana içeriğe geç
Yardım

4. Installing Klipper on SKR3 EZ

Adım 3 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Verify the RPI is connected to your network. Open command prompt and run

ping mainsailos.local

You should see it return successful pings

Open a web browser and go to

On the machine tab you can see the IP address of your RPI next to "wlan0"

I use Remote Terminal, but using your favorite SSH client login to your RPI with the default credentials

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.