Ana içeriğe geç
Yardım

MacBook Air 13" Mid 2013 Upper Case Replacement

Adım 3 Düzenleniyor —

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 3 kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Remove the following seven screws:

Six 1.6 mm Phillips screws securing the trackpad to the upper case.

One 1.4 mm T5 Torx set screw from its tapped hole near the front edge of the upper case.

During reassembly, do not over-tighten the set screw, as the button will cease to click at a certain point. Adjust the set screw until the movable side of the trackpad has minimal play.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.