Ana içeriğe geç
Yardım

Meta Quest 2 Screen and Lens Assembly Replacement

Adım 7 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 4kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Some interconnect cables have been removed in the following images for clarity purposes. You don't have to remove them as part of the procedure.

Use a Phillips screwdriver to remove the four screws securing the screen and lens assembly to the frame:

Two 6.5 mm‑long screws

Two 7.7 mm‑long screws

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.