Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı



Adım Tipi:

Yeniden düzenlemek için sürükleyin

If this is your first time applying thermal paste, I recommend using a quality thermal paste brand like Arctic Silver and reading a guide here on iFixit.

With the motherboard out, turn it upside down on a static free surface.

To remove the heatsink and replace thermal paste, remove the screws in the correct order (marked with a number on the heatsink).

Clean old thermal paste with isopropyl alcohol. Ensure that after applying thermal paste it doesn't leak onto the motherboard (if it's on the green square, it's fine).

When putting the heat sink back on, try to have the screw holes align on your first try. This is to maintain an even spread of the thermal paste.

Rescrew in the correct order (refer to the numbers on the heat sink).

Tighten each screw one at a time to end up with good heat dissipation.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.