Ana içeriğe geç
Yardım

HP All-in-one PC Model 24 Motherboard Replacement

Adım 4 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Locate the Stand Screws: Turn the PC over so that the back is facing up.

Unscrew the Stand: Use the screwdriver to remove the screws securing the stand.

Remove the Stand: Once the screws are removed, carefully detached the stand from the PC (should be able to pull up and out).

Note: The screws can either be removed from the stand or left on the stand. Just be sure to keep them in a safe location to avoid losing them during the process.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.