Ana içeriğe geç
Yardım

Canon EOS Rebel T7i Back Cover Replacement

Adım 2 Düzenleniyor —

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 3 kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Underneath the right I/F terminal cap, remove the following screws:

Two M1.7x5.5mm JIS #000 screws

On the right side of the camera, remove the following screws:

Two M1.7x4.5mm JIS #000 screws

On the back of the camera, remove the following screws next to the viewfinder:

Two M1.7x5.0mm Phillips #000 screws

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.