Ana içeriğe geç
Yardım

Spy Net Ultra Vision Goggles Camera & Display Screen Assembly Replacement

Adım 8 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Using the soldering iron, de-solder the various wires from the front and back of the circuit board.

There are three pairs of wires on the front side, along with a set of 7 leads for the main circuit board connector.

On the back side, there is a set of 9 leads for the microSD card connector.

Check out This Guide for tips on soldering and de-soldering.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.