Ana içeriğe geç
Yardım

Envizen V100M Rear Facing Camera Replacement

Adım 2 Düzenleniyor —

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Remove the solder holding the white ribbon cable in place, here is a guide on how to solder.

Then flip the motherboard over to access the screws for the rear facing camera.

Be very careful that you doe not tear the wires for the camera. gently flip the motherboard making sure to not stress out the wires.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.