Ana içeriğe geç
Yardım
Adım 6 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

You're going to have to pull that rivet out somehow. Me, I used locking pliers to pinch together the flared part of the rivet.

Note that I used locking pliers because they were the closest tool that worked. You can use regular pliers, a hammer and chisel, or even a flat rock.

Now pull the rivet out. Again, note that the rivet isn't absolutely necessary- it's to hold the inner shafts in and prevent them from going down too far, but in normal operation, the inner shafts really shouldn't be hitting that rivet.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.