Ana içeriğe geç
Yardım

Apple AirPort Express Base Station Power Supply Kit

Adım 14 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Insert the leads of the 240 Ω resistor through the holes indicated in step 7. This resistor will have a red, yellow, brown, and gold band on it. The direction of the resistor does not matter.

Be sure to route the leads so that they do not cover any needed holes from steps 7 and 8. Also, do not allow the leads to contact the leads of other components.

Solder the resistor to the PCB and clip the excess leads off.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.