Ana içeriğe geç
Yardım

iMac Intel 21.5" Retina 4K Display (2017) RAM Replacement

Adım 18 Düzenleniyor —

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Lift the RAM module to an angle of about 30 degrees and slide it out.

When handling the RAM module, touch only the outside edges. Take care not to touch the gold-colored contact points along the bottom edge.

To install a new RAM module, slide it in place at about the same angle until it is snug, and then swing it downward until the two clips snap into place.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.