Adım 2 çevriliyor
Adım 2
-
Use the opening tool to pry up and disconnect the Lightning connector cable connector from its socket on the logic board.
| - | [* black] Carefully peel off and remove the grounding cable from the edge of the headphone jack. |
|---|---|
| - | [* black] Take care not to lose the plastic gasket between the headphone connector and the outer shell. While aligning the headphone connector, make sure to align this gasket correctly. |
| + | [* black] Use the opening tool to pry up and disconnect the Lightning connector cable connector from its socket on the logic board. |
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.