iPhone 5 尾插更换

Adım 1 çevriliyor

İngilizce

Çince

Adım 1

iPhone 5 Lightning Connector and Headphone Jack Replacement: adım 0, 1 resimden 1.

Remove the following screws securing the Lightning connector assembly to the rear case:
One 2.9 mm Phillips screw
During re-installation, make sure that the headphone jack's plastic protrusion lies above the metal washer.
One 1.5 mm Phillips screw
Two 3.3 mm Phillips screws

-	[* black] Gently peel the speaker assembly away from the Lightning connector ribbon cable.
-	[* icon_note] If you are replacing the Lightning connector with a new part, make sure to transfer the rubber casing around the microphone. You can do this using a spudger.
+	[* black] Remove the following screws securing the Lightning connector assembly to the rear case:
+	[* red] One 2.9 mm Phillips screw
+	[* icon_reminder] During re-installation, make sure that the headphone jack's plastic protrusion lies above the metal washer.
+	[* orange] One 1.5 mm Phillips screw
+	[* yellow] Two 3.3 mm Phillips screws

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.