Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.
Adım 1 çevriliyor
Adım 1
-
Pull Touchscreen out and rotate 90 degrees. Remove the four 3 mm Phillips #000 head screws that are now exposed at the hinge.
-
Remove the two 5 mm Phillips #000 head screws that near the viewfinder.
-
Use a spudger and pry apart the two plastic columns surrounding the screen hinge.
-
Rotate the screen forward 90 degrees and push it back into its housing against the camera.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.