Adım 4 çevriliyor
Adım 4
Upper Arm Disassembly
-
Using a Phillips #0 bit/driver remove the (3) 1 x 5 mm screws from the upper housing. Note their position.
-
Remove the (2) 1.5 x 4.5 mm screws from the curved portion of the body.
-
Carefully to not pull the cables, slide the motor board off the retaining pegs.
-
Use the plastic spudger to flip the release locks on the 2 cables. Finish removing the board from the assembly.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.