Ana içeriğe geç

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 3 kılavuzları etkileyecektir.

İngilizce
Çince

Adım 16 çevriliyor

Adım 16
After your battery is properly positioned and installed, peel off and discard the clear plastic liner from the top. Make sure the liner doesn't accidentally pull off any of the black battery component coverings. If needed, use tweezers to hold them in place as you peel off the liner.
  • After your battery is properly positioned and installed, peel off and discard the clear plastic liner from the top.

  • Make sure the liner doesn't accidentally pull off any of the black battery component coverings. If needed, use tweezers to hold them in place as you peel off the liner.

  • Calibrate your newly installed battery: charge it to 100%, and keep charging it for at least 2 more hours. Unplug and use it normally to drain the battery. When you see the low battery warning, save your work, and keep your laptop on until it goes to sleep due to low battery. Wait at least 5 hours, then charge your laptop uninterrupted to 100%.

  • If you notice any unusual behavior or problems after installing your new battery, you may need to reset your MacBook's SMC.

正确放置和安装电池后,将其剥离并从顶部丢弃透明塑料衬垫。

确保衬里不会意外地拉掉任何黑色电池组件覆盖物。如果需要,在剥离衬垫时使用镊子将它们固定到位。

校准新安装的电池:将其充电至100%,并继续充电至少2小时。拔下电源并正常使用以排空电池。当您看到低电量警告时,请保存您的工作,并保持笔记本电脑一直打开,直到它因电池电量不足而进入睡眠状态。等待至少5个小时,然后不间断地将笔记本电脑充电至100%。

如果你在安装新电池后发现任何异常行为或问题,则可能需要重置MacBook的SMC。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.