Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.
Adım 4 çevriliyor
Adım 4
-
Place a thumb at each end of the exhaust vent, over the fan screw holes.
-
Push firmly in the direction of the ports until the logic board unclips and begins to slide out of the Mac mini.
| - | [* icon_caution] In this step you will be pushing the logic board free from clips holding it to the frame. ***Push only where directed*** or you may damage the fragile cooling fins. |
|---|---|
| - | [* black] Place a thumb at each end of the exhaust vent, over the fan screw holes. Press firmly until the logic board unclips. |
| - | [* black] Once the clips are freed, slide the logic board out of the case. |
| - | [* icon_reminder] When reinstalling the logic board, make sure to hold the thin [guide|115309|LED indicator light cable|stepid=222050|new_window=true] out of the way so it doesn't get damaged. |
| + | [* icon_caution] In this step, you'll push the logic board free from the clips holding it to the frame. ***Push only where directed*** or you may damage the fragile cooling fins. |
| + | [* black] Place a thumb at each end of the exhaust vent, over the fan screw holes. |
| + | [* black] Push firmly in the direction of the ports until the logic board unclips and begins to slide out of the Mac mini. |
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.