Ana içeriğe geç

Elegoo Mars 3 Endschalter tauschen

İngilizce
Almanca
Adım 3
Elegoo Mars 3 Limit Switch Replacement, Unplug the cable for the limit switch: adım 0, 1 resimden 1.
Unplug the cable for the limit switch
  • In my case the replacement limit switch was delivered already connected to a cable. If you are only replacing the actual switch you can skip this step and instead unplug the opposing end on the switch itself later..

  • Remove the limit switch cable connector in the bottom right corner by pulling it straight out.

  • Be sure to pull the connector, and not the cables!

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.