Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.
Adım 2 çevriliyor
Adım 2
-
Take note of the small free moving flap near the battery port seen in the first of the three photos.
-
Remove the front of the shell case with the spudger. Insert the spudger into the seam on the right side of the camera and pry away from the back case.
-
Using the spudger, repeat the process to remove the back of the case. Pry away from the front of the camera.
[* icon_note] At this point most of the parts in the camera should be free moving. | |
- | [* icon_note] Take note of the small free moving flap near the battery port seen in the first of the three photos. |
- | [* red] Now pry apart the top and bottom shell of the case. |
+ | [* red] Take note of the small free moving flap near the battery port seen in the first of the three photos. |
+ | [* black] Remove the front of the shell case with the spudger. Insert the spudger into the seam on the right side of the camera and pry away from the back case. |
+ | [* black] Using the spudger, repeat the process to remove the back of the case. Pry away from the front of the camera. |
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.