Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.
Adım 3 çevriliyor
Adım 3
-
Use tweezers to remove the first of two ribbon cables holding the LCD screen in place. Pull directly out of the port.
-
Use tweezers to remove the second of the two ribbon cables using the same method.
-
The LCD screen is now detached. Gently pull it apart from the rest of the camera with your hands.
- | [* red] Remove the two ribbon cables holding the LCD screen in place. Pull them directly out of the port they are plugged into. |
---|---|
- | [* icon_caution] Take care not to tear these ribbons as they are the communication network that your screen uses to operate. |
- | [* red] Now that your LCD screen is detached you can pull it apart from the rest of the camera. |
+ | [* icon_note] Turn the camera so that you are looking at the LCD screen. |
+ | [* red] Use [product|IF145-020|tweezers] to remove the first of two ribbon cables holding the LCD screen in place. Pull directly out of the port. |
+ | [* orange] Use tweezers to remove the second of the two ribbon cables using the same method. |
+ | [* icon_caution] Take care not to tear the ribbons. They are the communication networks that your screen uses to operate. |
+ | [* yellow] The LCD screen is now detached. Gently pull it apart from the rest of the camera with your hands. |
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.