Eşyalarını Tamir Et Topluluk Mağaza

Remplacement de l'écran complet du Macbook Core 2 Duo

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 12 kılavuzları etkileyecektir.

Kılavuza Dön
İngilizce
Fransızca
Adım 7
MacBook Core 2 Duo Display Replacement: adım 0, 2 resimden 1. MacBook Core 2 Duo Display Replacement: adım 0, 2 resimden 2.

  • For original Macbook Core Duo and Core 2 Duo models, see first picture and remove the following 2 screws from the right hinge mount:

  • One 6 mm Phillips on the left side of the hinge mount.

  • One 10 mm Phillips on the right side of the hinge mount.

  • For Santa Rosa/Penryn and 2009 models, see second picture and remove the following 3 screws from the right hinge mount:

  • One 3 mm smalller diameter Phillips on the far left.

  • One 5.2 mm larger diameter, 4.2 mm head Phillips in the middle.

  • One 10 mm larger diameter, 4.2mm head Phillips from the far right.

  • Before removing the right hinge mount, take care to see how its pieces fit together, including the small white plastic piece. Knowing how the mount pieces fit together will help with reassembly. Lift the right hinge mount with the small white plastic piece out of the computer.

Retirez les 2 vis suivantes de la charnière de droite :

Une vis cruciforme Phillips de 6 mm sur le côté gauche de la charnière.

Une vis cruciforme Phillips de 10 mm sur le côté droit de la charnière.

Pour les modèles Santa Rosa/Penryn, voir la deuxième image et enlever :

Une vis cruciforme Phillips de 3 mm et de plus petit diamètre tout à gauche.

Une vis cruciforme Phillips de 5,2 mm et d'un diamètre de 4,2 mm au milieu.

Une vis cruciforme Phillips de 10 mm tout à droite.

Démontez la charnière droite avec la petite pièce en plastique et enlevez-la de l'ordinateur.

-[* black] Remove the following 2 screws from the right hinge mount:
+[* black] For original Macbook Core Duo and Core 2 Duo models, see first picture and remove the following 2 screws from the right hinge mount:
[* red] One 6 mm Phillips on the left side of the hinge mount.
[* orange] One 10 mm Phillips on the right side of the hinge mount.
-[* black] For Santa Rosa/Penryn models, see second picture and remove:
+[* black] For Santa Rosa/Penryn and 2009 models, see second picture and remove the following 3 screws from the right hinge mount:
[* red] One 3 mm smalller diameter Phillips on the far left.
- [* orange] One 5.2 mm larger diameter 4.2 mm head Phillips in the middle.
- [* yellow] One 10 mm Phillips from the far right.
-[* black] Lift the right hinge mount with the small plastic piece out of the computer.
+ [* orange] One 5.2 mm larger diameter, 4.2 mm head Phillips in the middle.
+ [* yellow] One 10 mm larger diameter, 4.2mm head Phillips from the far right.
+[* black] Before removing the right hinge mount, take care to see how its pieces fit together, including the small white plastic piece. Knowing how the mount pieces fit together will help with reassembly. Lift the right hinge mount with the small white plastic piece out of the computer.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.