Hey there

I opened up my G512 LV to clean it up and change the silicons of it and add an extra ssd. After puting everything back together carefully and reassembled it the screen is not turning on … its dimmed and I can see something of windows by puting light on lcd.

Everything is fine with external display.

Every part of laptop ( battrey, ram, cpu Etc ) works fine.

But there is no luck with Built in display its just dimmed or better to say blacked out.

I also switched rams and reconnected the lcd cable to motherboard serveral times and no luck also tried hard reset and win + ctrl + shift + n.

I even tried electrisity discharge of mother board ( took off battrey and no adapter then holded power for 30sec ).

My tv won’t respond to remote control and it used to work.it isn’t the control because I have bought 4 controllers and have not worked so it can’t be the controller but the tv.it used to be like that a couple months ago but I had the toshiba remote app but just a week ago I have changed my internet and now can’t connect the tv to internet which means the app won’t work please I need an answer fast I really don’t want to waste more money please and thank you very much if you answer

In short, what do i need to re-solder the battery door latch switch?

A few days ago my canon 60d suddenly stopped working, it turned on once after i waited a while but the screen glitched out and it died and wouldn’t turn on since then. I was filming in the heat on the beach constantly in the sun. I was trying to find a fix for my dead camera and some people said i should push the tiny switch that is under the battery door so i did, i tried that a few times, no luck with switching on the camera and i was thinking i’m doing something wrong and then tried it again and it went to one side and then broke off.

Now i disassembled it and found the switch, so now i want to solder it back in the right place and i want to know what tools do i need (Heat gun, solder with a tiny tip) or some kind of paste.

P.S. If you know, please tell me the reason why my camera suddenly died. Could it have been from overheating, because i didn’t turn it off, it was in the sun and the battery was empty.

The Switch:

The spot where it was:

How can I Force the two earbuds to sync up and become one Bluetooth device?

They are coming up as two separate Bluetooth devices in settings and I can only connect to one at a time.

Is there a way to force reset them?

Disclaimer: I cannot Reset through the app as that only works with two of them connected. Right now I'm the wearables app there are two separate devices.

Why my phone is not starting

And nothing changed

Charging ports are easy to damage. Constant connecting and removal of the connector cord can be hard on the port and move, bend, or damage internal components. Sometimes a dropped phone can also cause charging issues. If your phone or mobile device has stopped charging correctly krogerfeedback

Hi,

My computer has had trouble charging. I replaced the charger (onE of the pins was stuck) but the problem has persisted. I noticed some burn marks on my charge port and and looking to replace it. Which charge port is the correct one? and which repair guide?

my macbook is a A1278 model, serial number is: C1MMHY1KDTY3

Hi,

My computer has had trouble charging. I replaced the charger (onE of the pins was stuck) but the problem has persisted. I noticed some burn marks on my charge port and and looking to replace it. Which charge port is the correct one? and which repair guide?

my macbook is a A1278 model, serial number is: C1MMHY1KDTY3