Ana içeriğe geç
Yardım

Huawei Mate 10 Pro Teardown

Adım 18 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

When it comes to the front-facing camera, we're not quite so pleased—it's very tightly secured in the midframe of the Mate 10 Pro. It wiggles a little, but removing it cleanly is going to be a challenge. So we focus on the display first.

But getting in between the display and the frame also looks to be a near-impossible task. No amount of heating, pulling, or prying saw any success. The front panel is glued tight and the tolerances are so small that there is simply no gap.

Our only chance is the hole in the midframe for the dual camera. And after using most of the wedging arsenal starting with a Halberd Spudger to an Opening Tool to a regular Spudger we end up with a metal Spudger. And finally a small gap opens up.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.