Ana içeriğe geç

Second generation of Wi-Fi iPad, released on March 11, 2011. Model number A1395. Repair is difficult and will require heat.

250 Soru Tümünü görüntüle

Actual LCD Cleaner for IPAD

Hi

Please can anybody advise what to use to clean the LCD under the Digitizer

I have noticed that the LCD can become really filthy once the digitizer is removed.

I have tried a soft brush

A micro fibre cloth

Both of these have left some marks on the Screen

im a bit hesitant to test any type of alcohol cleaner

Can anybody advise please, and only if youve tried it not advise on things that MAY work

Thanking you

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

Ive done a lot of ipad digitizer replacements. Your best bet is to avoid touching or getting it dirty to begin with.....BUT ALAS. It does happen.

Personally i use a VERY clean microfiber cloth. I would not recommend using any solution. Just a nice dry microfiber cloth should get it taken care of.

You do have to be precise though as around the edges you can grab little bits of left over adhesive and pull them across the screen and that will make big marks across it. Just use a little warm breath if need be and polish it as best as you can. Be careful also not to use too much pressure. Light and quick swirls are better than slow hard pushing.

Hope this helps

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Blow vapor from your mouth and wrap it gently with the glasses cloth,

just did it and worked

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Ali sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 5

Her zaman: 3,827