Ana içeriğe geç

Repair guides and support for your LG TV.

1349 Soru Tümünü görüntüle

after a loud bang, screen stopped working

While we were watching LG MT-42PX11H Plasma TV, there was a loud bang (similar to a firecracker) and the monitor / screen stopped working. The sound was still coming through fine though. We think a fuse blew.

Does anyone know if this conclusion sounds right and, if so, how we can repair it?

Thanks from Cape Town, South Africa

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 4
3 Yorum

My LG flat screen popped sharply and sound and picture went. The decoder stayed so it wasn’t a current ‘trip’. The TV just went dark and silent

tarafından

tina did you ever fix it?

tarafından

I also had the same issue with my lg TV plasma 49lf631, d sound was not coming on and after a while it made a loud bang/pop and the TV went blank. Please what do I do. I really need help. Thank

tarafından

Yorum Ekle

3 Cevap

Filtre ölçütü:
Seçilen Çözüm

Hi,

It is more likely to be a capacitor or the Y sustain board as these tend to go in Plasma TVs. If a fuse blew in most cases the sound would not still be working.

Unplug the power from the TV, wait a few minutes for the TV to 'discharge' and then remove the back cover and inspect the boards for any obvious signs of damage. The Y sustain board generally is on the left of the screen when looking at it from the back.

Take some close up pictures of anything that you suspect looks 'damaged' (or even not) and post them back here. Somebody no doubt will try to help.

Adding images to an existing question

Bu yanıt yardımcı oldu mu?

Puan 4

16 Yorum:

Hi there,

Thanks so much. You're awesome for responding and so doing it so quickly. I honestly appreciate it.

I have downloaded the service manual in the interim. I shall remove the cover and post the pictures.

tarafından

hi tina, were you able to make any progress, or make any posts? same issue with mine need help :(

tarafından

I'm having a similar problem. Trying to add photos now

tarafından

@Adam Udell ,

What is the make and model number of the TV?

tarafından

Just head same thing happen to mine, a loud POP and went dead won’t turn on. Are you still available for help?

tarafından

11 tane daha yorum göster

Yorum Ekle

I had this happen to me on a cheaper computer monitor.

when you get the board visible look for a blown capacitor. these are the vertical cylinders on the board that are around the same diameter as a dime but could be smaller or larger the tops of them should all be flat. if a capacitor is blown it will have a domed shaped top.

Might have to check with your local electronics store but most likely just need that capacitor replaced once I was successful replacing the one on my monitors video board it has worked great for the past 2 years with no issues!

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Görsel içeriğini görün:

Block Image

Block Image

Block Image

Block Image

Block Image

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Tina sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 14

Son 7 gün: 94

Son 30 gün: 463

Her zaman: 95,596