Ana içeriğe geç

Piston rod bushing and pin installation

I am rebuilding my 4.7L engine. I replaced all my piston rod bushing and realized that the piston pin would not slide in. From my understanding the are floating pin pistons.

Has anyone ever done this before. Is this something I need to take to the machine shop?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

Hi @dfloguy ,

Don’t know the answer but here’s the 2000-2003 Toyota Tundra Factory Service Manual (RM956U).

Scroll down and click on the ENGINE MECHANICAL (2UZ-FE) link.

In this section it details how to inspect and fit the piston pins and bushings.

Hopefully this is of some help.

Bu yanıt yardımcı oldu mu?

Puan 1

Yorumlar:

Hi @jayeff,

Thanks for the response. It really helped .

I had to get the rod bushing and pin fitted. I took them to a nearby machine shop.

tarafından

Yorum Ekle

Yanıtını ekle

Yamada sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 6

Her zaman: 110