Eşyalarını Tamir Et Topluluk Mağaza

Repair guides and support for phones by the Amsterdam-based company, Fairphone.

172 Soru Tümünü görüntüle

Seçenekler

swapping earbuds from old broken cable to new earphone cable

Hi. I’ve been sent a new earphone cable for my Fairphone earphones for my Fairphone 3. All I have to do is swap the earbuds from the old to the new cable but I’ve tried twisting them off and nothing is happening and I can’t find any instructions anywhere for this! Can anyone help? I find it so odd that self-repair and modularity is such a selling point for Fairphone but they seem to make it so unnecessarily obscure?!

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

Hey there!

This may be a little late, but try following this guide to replace the earbud cord. This guide does require soldering, so it is not an easy repair. However, the Fairphone earbuds may be easier than the generic ones shown in the guide. Some googling may shed some light on this.

Good luck and hope this helps!

Soldering Görseli

Kılavuz

How To Solder and Desolder Connections

Zorluk:

Zor
Headphone Cable Görseli

Kılavuz

How to Replace your Earbud's Cable

Zorluk:

Zor

—

30 minutes - 1 hour

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Seçenekler

@therealkirsten You’re right, information about these earphones is quite hard to find. The earphones appear to use a MMCX connector, you can follow this video to remove them.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Yanıtını ekle

Kirsten Foster sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 25