Eşyalarını Tamir Et Topluluk Mağaza

Repair and disassembly guides for smartwatches designed by Apple.

978 Soru Tümünü görüntüle

Seçenekler

AppleWatch only displays logo intermittently after battery replacement

I replaced the battery on my Apple Watch following the instructions here:

Apple Watch Series 1 Battery Replacement

Everything went fine, but when charging it for the first time:

  1. I don’t get the changing snake symbol
  2. The Apple logo will display for <1 sec and then stay off for about a minute.

I don’t think I tore any of the cables or shorted anything.

I am thinking it might be a defective battery. Has anyone had this issue and resolved it by replacing the battery with another new battery?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

My best friend had this issue and sent his series 1 to me for a new battery. Although I’ve tried two new batteries from different suppliers, it still did the same thing. I’m wondering if the software got corrupted or something. I would maybe try another supplier for the battery. I recommend mobile sentrix.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

1 Yorum:

@hootonberg @michael_314

I'm dealing with this right now. I've received 3 batteries from iFixit and all have been defective. The voltages have been way too low (2.2V to 2.4V) to accept a charge or boot the watch. It should be closer to 3.7V-3.8V at rest even when fully depleted. I have a thread going here (Apple Watch S1, Still have a boot loop after battery replacement) and over at macrumors (https://forums.macrumors.com/threads/ser...)

tarafından

Yorum Ekle

Yanıtını ekle

Michael Gagne sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 12

Her zaman: 718