Eşyalarını Tamir Et Topluluk Mağaza

Model A1418 / Mid 2014 / 1.4, 2.7 & 2.9 GHz Core i5 or 3.1 GHz Core i7 Processor

50 Soru Tümünü görüntüle

Seçenekler

Help! Ifixit HD replacement guide says 2 display cables, I have 3

I purchased an iFixit kit to replace the hard drive on my 2014 iMac 21.5” model 2805. I got to the point where one needs to unplug two display assembly cables : the display data cable and the display power cable. Which I did as instructed, but then realised there is a third cable between the board and the display. I don't know what it is and it doesn't seem to want to come out easily. I don't want to damage anything. The one that is still attached is on the far right. I have a picture but can't figure out how to attach it here. Thanks in advance!

Update (12/19/2021)

Here I hope is the picture of my computer's internals

Block Image

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
1 Yorum

@annmacl - Here's a guide to post images Adding images to an existing question

Basically you go into edit mode and a ribbon will be visible along the top edge of the text window the right rectangle icon opens the images store where you can =post it and then one one step to paste it into your text window.

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

I think you’ve got the iSight camera cable confused with the two display cables. Review step 27 in this guide iMac Intel 21.5" EMC 2805 iSight Camera and Microphone Cable Replacement You don’t need to touch this cable when you take the display off

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

6 Yorum:

Thanks, Dan. I realized the same thing after writing my first message… now I have to put the iSight cable back into its socket, sigh…

I am having trouble removing the cable that has the retaining clasp, latter doesn’t move well but I will try again today.

tarafından

@annmacl - Review Steps 19 & 20 in the guide I posted maybe that will help. Don't force! as you can damage things very easily.

tarafından

@danj Thanks, Dan. I realized the same thing after writing my first message… It was probably because I also consulted the OWC video on the same replacement job but it evidently depicted another type of logic board.

Here is what mine looks like. There are three cables, the outside one (closest to edge) was easy to remove, I assume that's the display data cable. The one in the middle must be the iSight cable, it is not connected to the display. The one on the right is the one that I am having trouble removing. I assume it is the display power cable. I can’t find a tab to lift up to get it out. Maybe I am doing something wrong?

I managed to put the iSight cable back into its socket, sigh…

tarafından

@annmacl - Click on this Blue link Step 20 - Display power cable Review the images.

tarafından

@danj. I reviewed the steps in your guide several times and tried to pull the display power cable out. But it doesn't come. And it does not look quite like the one in your picture. That's why I tried to post a picture, as poor quality as it is. Shouldn't it just come out fairly easily?

tarafından

1 tane daha yorum göster

Yorum Ekle

Yanıtını ekle

Amacl sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 7

Son 30 gün: 10

Her zaman: 68