Ana içeriğe geç

An audio/video receiver (AVR or home audio receiver) is a consumer electronics component used in home theaters that convert signals into sound.

280 Soru Tümünü görüntüle

Denon receiver HDCP error? Denon AVR-X2700H

So.... I'll do my best to explain this.

Like roughly 2 years ago, I had gotten a new home theater system, And When watching movies it goes black with no sound then in like 15 seconds it comes back. I think it's the Roku not communicating with the receiver with HDCP, This theoretically shouldn't be happening. All the cables are compatible with HDCP

Example:

Block Image



I'm using:

TV: Sony XBR-558H
Receiver: Denon AVR-X2700H
Roku: Roku Ultra

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
2 Yorum

@beanman56 The signal from the Roku displays okay on menus, correct?

tarafından

Yep. But some times it just in the middle of movies so blank.

tarafından

Yorum Ekle

2 Cevap

Filtre ölçütü:
En Yararlı Yanıt

Hi @beanman56

Have you checked that the Sony firmware, the Denon firmware and the Roku firmware are all the latest version?

I checked for firmware downloads on the Denon website to find out if there have been any updates since you bought it, but they don't have a firmware download page or at least none that I could find. Same with Roku.

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

@jayeff - Sadly all the firmware is the latest.

tarafından

Yorum Ekle

@beanman56 remove the Denon and connect it to something else. If it functions okay on that, you know it is not your receiver. If your Roku displays correctly on your TV as well, you know it is not your Roku. That will then leave an incompatibility between those two devices. Since your firmware is already updated etc. you may be at a proverbial brick wall where you can't use it.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Ben Capehart sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 3

Her zaman: 80