Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

  1. Peel back the sticker, using the tweezers on the bottom of the device to reveal the two screws.
    • Peel back the sticker, using the tweezers on the bottom of the device to reveal the two screws.

  2. Unscrew the two T5 screws using the T5 Torx Screwdriver.
    • Unscrew the two T5 screws using the T5 Torx Screwdriver.

  3. Insert the flat head screwdriver into the edge of the device. Using it as a lever, carefully pry the face-plate up.
    • Insert the flat head screwdriver into the edge of the device. Using it as a lever, carefully pry the face-plate up.

  4. Carefully grab the ribbon cable with two fingers and pull the yellow ribbon cable upwards away from the motherboard.
    • Carefully grab the ribbon cable with two fingers and pull the yellow ribbon cable upwards away from the motherboard.

  5. LCD iPhone Ekran Tamir Kit'leri

    Ömür Boyu Garantimiz kapsamındaki bütçe seçeneği.

    Shop Kits

    LCD iPhone Ekran Tamir Kit'leri

    Onarım maliyetlerini düşürün, kaliteyi değil.

    Shop Kits
  6. Remove the screen from of the face-plate.
    • Remove the screen from of the face-plate.

  7. Insert the new screen into the face-plate.
    • Insert the new screen into the face-plate.

  8. Reattach the yellow ribbon cable to the motherboard.
    • Reattach the yellow ribbon cable to the motherboard.

  9. Using two hands, hold both ends of the device and snap the two plates together.
    • Using two hands, hold both ends of the device and snap the two plates together.

  10. Re-insert the two T5 screws and tighten.
    • Re-insert the two T5 screws and tighten.

  11. Re-apply the label edges back down to cover the screws.
    • Re-apply the label edges back down to cover the screws.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Mike Sollars

Üyelik tarihi: 11-07-2013

507 İtibar

3 adet Kılavuz yazıldı

Takım

WRI115, Team 1-1, Ruszkiewicz Spring 2013 WRI115, Team 1-1, Ruszkiewicz Spring 2013 üyesi

WRI115-RUSZKIEWICZ-S13S1G1

4 Üyeler

3 adet Kılavuz yazıldı

Bir Yorum

Hi! Thanks for doing this. How do I release the yellow cable from the board?

Shaun B - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 1,467