Ana içeriğe geç
Yardım

Audio-Technica AT-LP120-USB Preamp Replacement

Adım 5 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

The final location that will be soldered are 4 individual wires, and be sure to take note of their exact order to ensure a proper re-connection later.

To solder off/on the wires, the RVC adhesive glue will need to be removed. If that is not an option, then remove the wires with the Pliers, as shown in step 2.

To solder off the individual wires, hold the heated soldering iron to the metal stud connection points and gently pull each wire until they disconnect.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.