Ana içeriğe geç
Yardım

Jawbone MINI JAMBOX Battery Replacement

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Unwrap and conserve the (hopefully functioning) power controller board from the old battery by cutting the tabs. The tabs are thin and soft and cut easily with a razor. Disconnect the positive terminal first. I used a voltmeter to find that the battery case is positive.

I trimmed the tabs about 1/8" from the board, just enough remaining so that I could later fold them over the wires of the new battery.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.