Ana içeriğe geç
Yardım

DJI Phantom 4 Shell Replacement

Adım 13 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Using a spudger or flathead screwdriver, gently pry up the LED cover.

Using a spudger or flathead screwdriver, carefully pry up the underlying sticker.

PRO TIP: Stick the sticker to the smooth side of the plastic LED cover to keep it clean and from losing stick. PRO TIP on reassembly: be sure to align the stickers so the tab fits in the snap slot.

Repeat this step on all four LED covers.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.