Ana içeriğe geç

Meta Quest 2 Screen and Lens Assembly Replacement

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 4 kılavuzları etkileyecektir.

İngilizce
Japonca

Adım 9 çevriliyor

Adım 9
Meta Quest 2 Screen and Lens Assembly Replacement, Reassembly note: adım 0, 3 resimden 1. Meta Quest 2 Screen and Lens Assembly Replacement, Reassembly note: adım 0, 3 resimden 2. Meta Quest 2 Screen and Lens Assembly Replacement, Reassembly note: adım 0, 3 resimden 3.
Reassembly note
  • During reassembly, be careful not to trap the twelve cables as you insert the lens assembly into the outer shell:

  • Three cables along the top edge—two flex cables and one LED flex cable

  • Two cables in the top right corner—the battery connector and an antenna cable

  • Two cables along the right edge—an antenna cable and a wide flex cable

  • Two flex cables along the bottom edge

  • Three cables along the left edge—one antenna cable, one flex cable, and one speaker cable

  • You can use a rubber band to help secure the cables out of the way.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.