/
Tezgahım

Cihazların için kılavuz, parça ve yanıtlara hızlı erişim edin

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Üye Ol
Giriş Yap

Remplacement de la partie inférieure du boîtier du Toshiba Satellite C55D-B5206

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 7 kılavuzları etkileyecektir.

Kılavuza Dön
İngilizce
Fransızca
Adım 2
Toshiba Satellite C55D-B5206 Back Casing Replacement: adım 0, 1 resimden 1.

  • Insert a spudger at the center and into the crevice between the bottom casing and the keyboard and pry upwards.

  • Gently slide the spudger along the entire perimeter of the device and pry the casing loose to unhook 6 clips.

  • These images show a metal spudger, which has the potential to damage the device. Use a plastic opening tool or standard spudger instead.

  • Do not be alarmed if you feel a gentle tug or hear a click as you slide your spudger. These sounds are the clips detaching from the casing.

En commençant par le centre, insérez un spudger dans l’interstice entre la partie inférieure du boîtier et le clavier puis faites levier vers le haut.

Faites glisser délicatement le spudger le long du périmètre de l’appareil et faites levier tout autour du boîtier pour détacher les six clips.

Ces images montrent l’utilisation d’un spudger métal, cela constitue un risque d’endommager l’appareil. Utilisez un outil d’ouverture en plastique ou un spudger standard la place.

Ne vous inquiétez pas si vous entendez des craquements ou un clic lorsque vous faites glisser le spudger. Ces son sont produits lorsque les clips se détachent du boîtier.

-[* black] Starting at the center, insert a spudger into the crevice between the bottom casing and the keyboard and pry upwards.
-[* black] Gently slide the spudger along the entire perimeter of the device and pry the casing loose to unhook six clips.
+[* black] Insert a spudger at the center and into the crevice between the bottom casing and the keyboard and pry upwards.
+[* black] Gently slide the spudger along the entire perimeter of the device and pry the casing loose to unhook 6 clips.
[* icon_caution] These images show a metal spudger, which has the potential to damage the device. Use a plastic opening tool or standard spudger instead.
[* icon_note] Do not be alarmed if you feel a gentle tug or hear a click as you slide your spudger. These sounds are the clips detaching from the casing.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.