Ana içeriğe geç

İçindekiler

Öğrenci Katkılı Viki

Bu vikiyi, eğitim programımızdan harika bir öğrenci ekibi yaptı.

Shaver Will Not Start

Shaver doesn't respond when power button has been pressed.

Defective Adapter

Check if the power adapter is plugged in and the charge light is on. If not then your charging adapter might be faulty.

Low Battery

Check if your battery is charged by plugging in the charger and making sure the indicator light is green and not red.

Replace the Battery

If the battery won't charge at all then the battery might be faulty and you might need a replacement for that, follow this guide to replace the battery.

Shaver Wont Charge or Hold Charge

Your battery might be faulty.

Replace Battery

Your battery might be the reason why the shaver is not working, so replace the battery with a new one by following this guide.

Check the Indicator Light

The indicator light on the shaver can tell you if the battery has faulty wiring. If you see any light, then the wiring is not faulty and it’s the battery that needs to be replaced.

Pop Up trimmer Comes Apart

While opening the trimmer the springs might come loose.

Replace the Trimmer

Sometimes when you open the pop up trimmer the spring that retracts the trimmer might also come apart with it. You can follow this guide to replace the spring and the trimmer.

Replacing the Casing

The pop up trimmer may be coming apart due to a defective casing. In this case, follow this guide for dismantling and reassembling the shaver casing.

Shaver Blades Do Not Cut Properly

Your blades might have gone blunt and all you need is a replacement.

You Might Have to Remove Hair Build Up from the Blades

Clean out the shaver head by simply pushing the button that opens it up and clean all the hair that is stuck between the blades.

Replacing the Shaver Heads

The shaver heads are the silver circular parts on the head of the shaver that come in contact with the skin. You have to remove the old shaver heads and reinstall new ones to have a fresh and sharp shave. Follow this guide to install new shaver heads.

Trimmer Stops Suddenly After Turning On

This happens because your battery is faulty or the shaver is dead.

Replacing the Shaver Head Seat

You might need to align the shaver head seats to ensure the shave runs properly, sometimes when mechanical parts collide/rub against each other things don’t run properly. You can follow this guide to replace the shaver head seat.

Shaver May Be Overheating

If the shaver is overheating, that might cause the trimmer to stop. In this case the most feasible course of action would be to buy a new trimmer.

Aum Patel

Üyelik tarihi: 10/02/17

364 İtibar

3 adet Kılavuz yazıldı

Ekip

USF Tampa, Team S1-G4, Thompson Fall 2017 USF Tampa, Team S1-G4, Thompson Fall 2017 üyesi

USFT-THOMPSON-F17S1G4

3 Üyeler

10 adet Kılavuz yazıldı

11 Yorum

Shaver starts automatically.

Shreyas Paturkar - Yanıt

can’t find spot to show how to ‘replace battery’ on my Philips shaver

Marc Goldberg - Yanıt

how do i replace my battery on my Philips Norelco shaver?

Marc Goldberg - Yanıt

This shaver sucks It is not worth the money battery dead after two months will not charge at all followed instructions to replace and now no indication light or nothing I do not recommend buying this product at all

alfonso59g - Yanıt

²razor turns on and stops whats the problem

Brendan Maher - Yanıt

Try this, have you cleaned the shaver head? Take the head apart and clean each individual parts and put back together. The problem I had was my shaver would turn on and then turn off right away. This fixed my problem. Good Luck.

Kelly Theuerkauf -

Cleaning and charging station does not work

Howard Fichman - Yanıt

the shaft turns but the razor head just moves slightly but won't work......other acessory works off the shaft and the motor shaft turns freely

bob freeman - Yanıt

I was read these troublshooting steps and now the charging issue is fixed.

Troublshooter - Yanıt

need help, after plugging in the norelco shaver in the wall the other end at the end of shaver keeps falling out, need to know how can i tighten it up? thanks

Tom Genn - Yanıt

Don't buy after market cutters, they are not fit for purpose. Just a waste of money. Only buy genuine Philips, if you can get them!

Einstein - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 6

Son 7 gün: 22

Son 30 gün: 68

Her zaman: 14,511