Ana içeriğe geç
Yardım

Oculus Quest 2 Disassembly

Adım 8 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Remove two P000, 4.8 mm long screws.

Remove four P000, 4.8 mm long screws.

Remove two P000, 10.7 mm long screws.

The arrow points to the Bluetooth antenna. To disconnect see step 5 of the Guide. Go to picture 2. To disconnect the cable, slide a thin, ESD-safe pry tool or tweezers under the metal neck of the connector and lift straight up from the board.

Picture 3. Remove the antenna from the headset.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.